ACP sheets are the most affordable cladding you can specify in India, but the number you are quoted per square foot changes a lot with thickness, coating and whether fitting is included. This guide lays out ACP sheet prices per sq ft in India for 2026, 3 mm against 4 mm, PE against PVDF, sheet-only against installed, so you can read a quote properly before you sign it.
ACP sheet price per sq ft in India (2026): at a glance
Urbane Decor supplies ACP from ₹75 per sq ft in 3 mm and 4 mm, across 100+ finishes, in Platinum, Pearl and Ruby grades plus fire-retardant FR. The table below shows indicative 2026 market ranges for the sheet alone so you can place any quote against them.
| ACP type | Thickness | Coating | Indicative price (sheet only) | Typical use |
|---|---|---|---|---|
| Interior / signage grade | 3 mm | PE | ₹75 - ₹110 per sq ft | Interior walls, ceilings, shop interiors, signage |
| Standard grade | 4 mm | PE | ₹95 - ₹140 per sq ft | Covered exteriors, canopies, interiors needing rigidity |
| Exterior grade | 4 mm | PVDF | ₹130 - ₹220 per sq ft | Facades, elevations, shopfronts exposed to sun and rain |
| Fire-retardant (FR) grade | 4 mm | PVDF | ₹180 - ₹300 per sq ft | High-rise, hospitals, malls, anywhere fire norms apply |
| Premium finishes | 3 / 4 mm | PVDF | Add ₹20 - ₹60 per sq ft | Woodgrain, stone, mirror, brushed and sparkle metallics |
A standard ACP sheet is 4 ft × 8 ft, which is 32 sq ft. So a 3 mm PE sheet works out to roughly ₹2,400 - ₹3,500 per sheet and a 4 mm PVDF exterior sheet to roughly ₹4,200 - ₹7,000 per sheet. Rates vary by brand, city and order size; trade and BOQ pricing brings the per-sq-ft figure down on larger quantities.
3 mm vs 4 mm ACP: which thickness do you need?
3 mm ACP is the economy thickness. It is light, easy to rout and fold, and perfectly adequate for interior cladding, ceilings, column wraps and signage boards where the panel is fully supported and never carries wind load.
4 mm ACP is the standard for exteriors. The thicker core resists wind pressure and oil-canning (the visible ripple on large flat panels), takes fixings better and stays dead flat on big elevations. At about 5.5 kg per square metre it is still a fraction of the weight of stone or solid metal. If the panel will face weather, specify 4 mm.
PE vs PVDF coating: the difference that decides lifespan
The coating on the aluminium skin matters more than most buyers realise. PE (polyester) coated ACP is cheaper and fine indoors or under cover, but it chalks and fades within a few years of direct sun. PVDF (polyvinylidene fluoride) coated ACP holds its colour and gloss through years of Indian sun, monsoon and pollution, which is why it is the exterior standard and why coating warranties run up to 10 years. For any facade, elevation or shopfront, the extra ₹35 - ₹80 per sq ft for PVDF is the cheapest insurance you will buy.
ACP price with fitting: what "installed" actually includes
Sheet-only prices are only half the story. An installed ACP quote should cover fabrication (cutting, routing and folding the trays), the aluminium sub-frame or framework, fixing, sealant and finishing trims, plus scaffolding or access on exteriors.
| Scope | Indicative fitting cost | Indicative total installed |
|---|---|---|
| Interior wall or ceiling cladding, 3 mm PE | ₹60 - ₹100 per sq ft | ₹135 - ₹210 per sq ft |
| Exterior facade with framework, 4 mm PVDF | ₹120 - ₹200 per sq ft | ₹250 - ₹420 per sq ft |
| Shopfront or fascia with signage cut-outs | ₹130 - ₹220 per sq ft | ₹260 - ₹440 per sq ft |
Always ask whether the quote is per sq ft of finished wall area or per sq ft of sheet used. Wastage on cut-outs and returns typically adds 8 - 15 percent to material, and a proper quote will show it as a line, not hide it in the rate.
Worked example: a 15 × 10 ft shopfront
A 15 ft wide, 10 ft high shopfront is 150 sq ft. In 4 mm PVDF exterior-grade ACP at around ₹160 per sq ft, the sheets come to about ₹24,000 (roughly five 4 × 8 ft sheets with wastage). Fitting with framework at about ₹150 per sq ft adds ₹22,500. That puts the finished front at roughly ₹46,000 - ₹47,000 plus GST, before signage lettering or lighting. The same front in 3 mm PE would be cheaper on day one and would need recoating or replacement far sooner.
What moves the ACP price up or down
- Thickness: 4 mm costs 20 - 30 percent more than 3 mm.
- Coating: PVDF over PE is the single biggest jump, and the one worth paying for outdoors.
- Grade: FR cores for fire compliance cost more than standard cores.
- Finish: solid colours are the base; metallics, woodgrains, stone and mirror finishes carry a premium.
- Quantity: a full facade or a multi-site rollout earns trade and BOQ rates.
- City and access: high-rise work and scaffolding raise fitting cost; ground-floor interiors are cheapest to install.
Which ACP should you choose?
- Interior walls, ceilings or a signage board: 3 mm PE.
- Covered exterior, canopy or soffit: 4 mm PE or PVDF.
- Facade, elevation or shopfront in direct weather: 4 mm PVDF.
- High-rise, hospital, mall or anywhere fire norms apply: 4 mm FR-grade PVDF.
Urbane Decor supplies ACP in 3 mm and 4 mm across 100+ finishes with trade and BOQ pricing, backed by a six-year warranty with coating cover up to 10 years. Orders are dispatched within 24 working hours and reach most of India in 5 to 6 days, with installation available in major cities.
Not sure which finish is right for your space? Order free samples and our team will help you choose the best panel for your walls, budget and climate. Dispatched in 24 working hours, delivered across India in 5 to 6 days, with a six-year warranty.
Get Free Samples →Related guides
Frequently Asked Questions
How much does an ACP sheet cost per sq ft in India in 2026?
ACP sheets start from ₹75 per sq ft for 3 mm PE interior grade. Indicative 2026 market ranges are ₹75 - ₹110 for 3 mm PE, ₹95 - ₹140 for 4 mm PE, ₹130 - ₹220 for 4 mm PVDF exterior grade and ₹180 - ₹300 for fire-retardant FR grade, sheet only.
What is the price of a 3 mm ACP sheet?
A 3 mm PE ACP sheet is typically ₹75 - ₹110 per sq ft in 2026. A standard 4 ft × 8 ft sheet is 32 sq ft, so one sheet works out to roughly ₹2,400 - ₹3,500 depending on brand and finish.
What is the ACP sheet price with fitting?
Installed ACP typically costs ₹135 - ₹210 per sq ft for interior 3 mm PE cladding and ₹250 - ₹420 per sq ft for a 4 mm PVDF exterior facade with aluminium framework. Fitting alone runs about ₹60 - ₹100 per sq ft indoors and ₹120 - ₹200 per sq ft on facades.
What is the price of ACP for 1 square foot?
For a single square foot the sheet-only rate is ₹75 - ₹110 (3 mm PE) up to ₹130 - ₹300 (4 mm PVDF and FR grades). ACP is sold by the full 4 × 8 ft sheet, so small jobs are priced per sheet rather than per square foot.
Is 3 mm or 4 mm ACP better?
Use 3 mm for interiors, ceilings and signage where the panel is fully supported. Use 4 mm for any exterior facade, elevation or shopfront, because it resists wind load and stays flat on large panels.
What is the difference between PE and PVDF ACP?
PE (polyester) coating is cheaper and suited to interiors or covered areas; it fades in direct sun. PVDF coating holds colour and gloss through years of sun, rain and pollution, which is why it is the exterior standard and carries coating warranties of up to 10 years.